If you're staring down a quote for a sandvik rock crusher, a vibrating screen, or even just a replacement bucket for your decky loader and wondering whether the "cheap" option is actually cheaper—this is for you. I've managed equipment procurement for a mid-size mining services company for 7 years. Our annual equipment and parts budget sits around $2.3 million. I've negotiated with 40+ vendors and made my share of expensive mistakes so you don't have to.
This checklist won't tell you which brand to buy. It will tell you how to evaluate any quote so the number at the bottom doesn't surprise you at month 18.
Seven steps. In order.
This sounds obvious. It isn't. I still kick myself for the time we let a vendor's "recommended configuration" define our spec sheet for a decky loader setup. We ended up with a unit that was technically capable but oversized for 60% of our work. The extra capacity was nice. The extra cost wasn't.
Start with three numbers: throughput you actually need (not the peak you'd like), hours per week the machine will run, and the material you're handling. Write them on a sticky note. Tape it to your monitor. Now compare every quote against that sticky note—not against the competitor's spec sheet, and not against the salesperson's assurance that "most companies your size go with X."
(Mental note: I should really turn this into a form our team fills out before any RFQ goes out. One day.)
The sticker price is maybe 40% of what you'll actually spend. The rest shows up in wear parts, fuel or electricity, maintenance labor, downtime, and—the silent killer—lead time for replacement components.
For a sandvik vibrating screen, ask specifically: What's the cost and availability of screen media? How often does it need replacing? Is there a local distributor, or does every part ship from overseas? For a rock crusher, the questions are: wear liner cost per ton, jaw or cone replacement interval, and whether your maintenance team needs factory training before they can touch it.
I don't have hard data on industry-wide parts pricing trends, but based on our 6 years of purchase records, wear parts for budget-brand crushers ran us 22% more annually than the premium option we eventually switched to. That's the number that matters. Not the invoice price.
This is the step most people skip. A crusher is useless without the right bucket or feeder. An excavator is useless without the right attachment for your soil conditions.
I watched a competitor buy a backhoe loader at a great price, then discover the bucket options for their specific application were limited to two OEM suppliers—both charging well above market. The "deal" evaporated in the first attachment order.
Excavator vs backhoe is a classic example. The backhoe is cheaper upfront. But if your work involves frequent attachment changes or deep trenching in tight spaces, the excavator's higher sticker price pays back in flexibility. We ran the numbers on a 3-year lease for our utility work: the excavator cost us $14,000 more upfront but saved $19,000 in labor hours and attachment changeover time. Your mileage may vary—this was for our specific mix of site prep and utility work. If you're doing mostly flatwork with occasional digging, the backhoe still wins on pure economics.
Sandvik has a strong global dealer network. That's a real advantage. But "global" doesn't mean "next door." Ask the dealer: What's your current lead time on a specific part number? Not the general answer. The specific one.
We once bought a crusher from a vendor with an impressive regional presence. Turned out the "regional warehouse" stocked filters and hoses. A cracked toggle plate meant 6 weeks of downtime. The lost production cost us $47,000. That's the kind of number that doesn't show up on a quote comparison spreadsheet.
Before signing, call the parts desk yourself. Ask about a component you know is a wear item. Time how long it takes them to give you a real answer.
Sandvik builds good equipment. That's not the question. The question is whether the dealer standing in front of you will answer the phone in month 14 when something goes wrong.
Ask for two references: one customer who bought in the last 6 months, and one who bought 3+ years ago. The recent buyer will tell you about the sales experience. The long-term buyer will tell you about the support experience. Pay more attention to the second one.
This is where the "value over price" principle becomes concrete. Before you sign, ask for a written list of every cost that isn't in the quote: setup, training, freight, commissioning, extended warranty, and consumables for the first 500 hours.
The surprise for us wasn't the equipment price. It was the $3,800 "commissioning service" that appeared on the first service invoice. The quote said "installation included." The fine print defined "installation" as "delivery to site." That $3,800 turned into a $6,200 lesson when we had to expedite a part we hadn't budgeted for. Yes, I'm still annoyed about it.
This is the step I wish I'd known about earlier. Negotiate a structured review 30 days after commissioning. Not a "how's it going" phone call—a documented checklist covering throughput, fuel or energy consumption, operator feedback, and any unplanned downtime.
We started requiring this in 2023. It caught two issues: a screen deck that was undersized for our actual material (vendor's fault) and an operator training gap (our fault). Both got fixed under warranty because we documented them early. Without the 30-day review, those problems would have surfaced at month 6, after the warranty window narrowed.
The cheapest quote has cost us more in roughly 60% of the purchases I've reviewed. Not because the vendors were dishonest. Because we weren't asking the right questions. This checklist is how I ask them now.
Describe your project and our advisors will recommend the right crane type with cost comparison.
Talk to an Advisor