Potain MR 295: The Real TCO Math I Wish I'd Run Before Buying

Published Friday 6th of November 2026By Arjun Mehta

The Bottom Line First

When you're buying a tower crane — including a used Potain MR 295 — the 15-20% you "save" on the sticker price usually disappears within the first year. Not on parts. Not on repairs. On waiting, freight, and downtime. TCO isn't a finance term. It's the filter that separates a good deal from an expensive mistake.

The formula I use now: purchase price + freight + assembly/disassembly + first-year parts + downtime risk + resale discount = TCO. Skip any variable and you're not making a purchase decision — you're gambling.

Below is what I got wrong, and how I screen now.

Why You Should Listen to Me (Briefly)

I've handled equipment purchasing at a mid-size tower crane rental company for seven years. I've bought or evaluated roughly 60 used units. Potain accounts for more than half — MCT 85, MDT 219, MR 415, I've worked with all of them. I've personally screwed up twice: one cost $8,200, the other $11,600. Both for the same reason — I stared at the quote and nothing else.

In 2019, I bought my first used MR 295 from a broker. His price was 12% below market. I thought I'd found a deal. The post-delivery inspection report flagged pitting on a gear set in the slewing mechanism. Repair quote: $6,400. The unit sat for nine extra days — at the time it rented for $2,800/month, so that was another $840 in lost revenue. The worst part was the early-generation control panel: replacement parts had to ship from Europe, a 5-week wait, $3,900 including freight. Total extra first-year spend: north of $11,000.

I eventually sold that machine. The contractor who bought it from me ran it fine for years, because he had his own service crew and a spare-parts shelf. That's when I learned the real lesson: the same crane can have a 30% different TCO depending on who owns it. My filter stopped being "which one is cheaper" and became "which one can I afford to keep running."

Three Things Most Buyers Miss (None of Which Appear on the Quote)

1. Service Radius Beats Price

Potain builds cranes in China, France, and India — but the question that matters is where the consumables for your specific model actually ship from, and how fast they arrive. In 2022, I handled a batch of MDT 219s where a replacement variable frequency drive took 11 days to ship from France. Eleven days of downtime isn't just 11 days of lost revenue — it's the week your customer stops calling.

On the Utah question — I've searched "potain crane for sale utah" more times than I care to admit, because local buyers there ask about service constantly. The answer isn't exactly a clean yes or no. There's a certified service provider near Salt Lake City and a regional service center in Jacksonville, but whether the control board for your specific serial number is physically in stock requires two phone calls. I'd argue the second call — the one to the parts desk, not sales — is the most important step in this whole process.

2. Freight and Assembly Are Hidden Line Items

A fully dressed MR 295 ships in pieces: counterweight, jib, mast sections. My current process is to get the crane quote, then immediately get a fixed freight quote. Last time, a Shelby truck hauler quoted $4,800 one-way for the counterweight, jib, and mast sections — not including oversize permits in three states. I went with a different carrier at $5,400 all-in, and the total math actually came out cheaper.

Assembly windows cost money too. Rental contracts never include a line item for "waiting on logistics." One lost day is one lost day of rental income. To be fair, heavy equipment transport is inherently unpredictable — but pricing that unpredictability upfront is a different thing than eating it after the fact.

3. Model Lifecycle Determines Your Exit Cost

This one is a bit counterintuitive. Potain MR 295 tower cranes hold their value reasonably well on the secondary market, but the specific generation of the electrical control system can swing resale value by thousands. Buyers look at the nameplate. Insiders look at the control cabinet model. The same detail that makes a unit cheap on the front end will make it cheap when you sell it, too.

Choosing a tower crane is a lot like choosing a power drill: the spec sheet tells you something, but if that's all you look at you're missing the point. The difference is, a bad power drill costs you a few hundred bucks. A bad tower crane decision costs you a year of cash flow.

Three Questions (Not an "Are You Smarter Than a Fifth Grader" Quiz)

My pre-check list has exactly three items. It's not an "are you smarter than a fifth grader" questions test with a correct answer at the bottom — it's a habit, and the habit is what catches the mistakes.

  1. Can the consumable parts for this machine reach my jobsite within 72 hours? Call the parts desk. Not sales.
  2. If this unit fails on day one, what's my daily downtime cost? Write the number down. No mental math.
  3. If I sell it in three years, who's buying, and at what range? Ask two used-equipment dealers and treat their bids as your exit cost.

I've used this list for three years and it has stopped me from pulling the trigger on at least nine "cheap" quotes. The most recent was a March 2024 MR 415 priced well below market — I walked away after checking the control cabinet model.

One relevant standard here: OSHA 1926 Subpart CC requires annual crane inspections, and if a used unit can't produce recent documentation, that's a red flag regardless of price. ASME B30.3 covers tower crane safety design and testing — I'm not an engineer, but those documents are public, and I'd argue every buyer should skim them before signing anything.

When "Cheap First" Is Actually Correct

I have to be honest: the low-price filter isn't always wrong.

If you're renting short-term, if your project timeline is under six months, and if you already have a spare-parts shelf plus a service crew on payroll, then pricing-first is fine. In that scenario, you've already internalized the variables above. Price is the only remaining variable, and you should optimize for it.

I also need to draw a line here: I'm a procurement guy, not a structural engineer. Wind loading, foundation capacity, site-specific engineering — that's a PE's signature, not mine. I can help you build a TCO checklist. I can't tell you whether this crane is right for your site. For that, call a registered structural engineer or the manufacturer's application engineering team.

One last thing I'd suggest asking yourself: if this machine breaks down tomorrow, will I be relieved or regretful? If the answer leans toward regret, that 12% you saved wasn't a savings at all.

Need Help Choosing?

Describe your project and our advisors will recommend the right crane type with cost comparison.

Talk to an Advisor